2pcs Smiley Kids Walkie Talkie Handheld Transceiver Radio Interphone With Compass Intercom Mini Toys Walkie-talkie Baby Gifts

Due to the display, there may be color difference, subject to the actual product received

Please chooseEurope Frequencyin "EURO" ; chooseUS Frequencyin "American" .

(Note: products do not include adapter and battery!!!)

*Europe Frequency widely used in European countries: such as Russian,France, Spain, Belarus, Ukraine, Sweden,Poland,Netherland,Germany…

*US Frequency widely used in: Brazil, Mexico, New Zealand, US and Canada…

Note: 8CH is Europe Frequency 446.00625-446.09375 Mhz

22CH is US Frequency 462.5625-467.7250Mhz

Using the device

1，Turning the device on/ off
Switch on the device: Press and hold on the   3 seconds then you will hear a beepsound.
Switch off the device: Press and hold the 3seconds then you will hear a beepsound.

2,Adjusting the volume
To increase the volume, press the Up  button.And press the Down

 button todecrease the volume.

3,Low Battery Indication
The device can detect the low battery level when the battery voltage goes low.When battery voltage is low, the battery icon will flash and a beep will be heard toindicate that the batteries need to be replaced.

4,Receiving/ transmitting communications:
The devices are in“Reception"mode when it is turned ON and no transmittingWhen a signal is received on the current channel, the LCD will display in reception.When you press the PTT(push to talk) button, the devices switches to"Transmis-sion" mode.
Hold the device in a vertical position with the Mic(microphone) 3-5cm away from vour mouth.While holding the PTT button, speak into the microphone in a normaltone of voice.
Release the PTT button when you have finished transmitting.
For others to receive your transmission, they must be on the same channel withyou.

Note:
1,The talking range will depend on your surroundings and environment. It will be affected by obstructions such as hils or buildings.

2，Don’t try to use two devices which are less than 1.5m (5 feet) apart. Otherwise,you may experience interference.

5, Changing Channels
Press the MENU button one time, The channel number will flash on the display.Press the up/down button to change the channel.
Press the PTT button to confirm and return to stand-by mode.
Note: if no button is pressed within 15 seconds during setting, the device will return to stand-by mode.

6,CTCSs (Continues Tone Coded Squelch System
Press the MENU button twice, the current CTcSS code will flash on the display.Press the up/down button to change the 38 available codes.
Press the PTT button to confirm and return to stand-by mode..
License free radio’s operating on the 400-47OMHZ frequency band, the device has 8/22(option) available radio channels. If there are many device users near you,there is a chance that some of the users are operating on the same radio
channel.
When using CTCSS, a low frequency tone (between 67-250Hz) will be transmittedalong with the voice signal.There are 38 available tones to choose form.
You are free to choose one of the 38 available sub-channels. Due to filtering, thesesub-channels will generally not be audible so they will note disturb the communi-cation.

7, Vox (Hands free function)
Press the MENU button three times, the current VOX setting will flash on the displayand the VOX icon will display,
Press UP▲  button to set the Vox sensitivity level between 1 and 3 level(Ievel 3 is thehigh sensitive level).
Press down vbutton until“OF" appears on the display to turn VoX OFF.
Press the PTT button to confirm and return to stand-by mode. In VOX mode, the radio will transmit a signal when it is activated by your voice or other sound around you.
voX Operation is not recommended if you plan to use your device in a noisy or windy environment.:
Note: VOX mode will be over ride when you press the T button.

8, Scanning for an active radio channel
Press and hold the UP ▲button 2 seconds:The "SCAN" function indicator willappear on the display and the channel will scan continuously from1 to 8/1to22.
Once an active channel is found, the scanning will stop and you can listen to the transmission.
When the transmission is on the found channel stop, the scanning will resumeautomatically.
Note: If you press PTT button while listening to a found channel, the device will goback to stand-by mode on the found channel.

9, Monitor
Press and hold the DOWNvbutton about 3 seconds to active monitor.Release the DOWN vbutton return to stand by mod

10, Setting the Call tones
The device has 10 call tones.
Press the MENU button 4 times,"CA" is displayed and on the current call tone.Press the UP▲/Down button to change another call tones.
Press the PTT button to confirm and return to stand-by mode.

11, Sending a call tone
Press the PTT button one time quickly, the call tone will be transmitted on thesetting channel.

12,Roger Beep On/Off
After the PTT button us released, the device will send out a roger beep to confirmthat have stopped talking.
Press the MENU button 5 times,"RO" will be displayed.
Press the UP▲/Down button disable the roger beep ON/OFF.
Press The PTT button to confirm your selection and return to the stand-by mode.

13,Backlit display
Press any button except for the MENU button to activate the back light of theLCD display.The back light will light on about 5 seconds.

14, Earpiece connection
The device can be used with earpiece (lf there is earpiece packed together with the device).
The connector is located on the top of the device.
lnsert the earpiece plug into the connector (2.5mm jack).
There is a small“PTT" button on the earpiece that has the same function as the PTTbutton on the device.
When you use the PTT button from the earplece, you must also use the microphonefrom the earpiece to talk.
Note: Do not connect other earpieces, it may damage your device.

15,Battery saving function
When the device has not been used for 6 seconds, the economy mode is automati-cally activated.This does not affect the reception of transmission and the stand bymode is automatically re-activated as soon as a signal is detected.16, Built-in Flash light
Your device has a built-in flash light that can be used in sending light signals or for our lighting needs.

17,Lock & Unlock the device
Press and hold MENU button for 3 seconds to lock the device.Press and hold MENU button for 3 seconds to unlock the device.

18,Technical specifications
Frequency  400-47OMHZ
Channel number   8/22 channels
Sub-code  CTCSS 38
Transmission Power≤0.5WRange   Up to 6 Km in open field
Battery type  3* AAA Alkaline/rechargeable batteries  (not included)
Modulation type   FM-F3E
Channel spacing   12.5 KHz (Narrow band)

Packing Listing:

2* Walkie Talkie ( 3* AAA battery not include )

1* English Manual